Thursday, November 1, 2007

Catching up with the truss building

My mom pointed out that I skipped over some important stuff, so bear with me as I describe building the trusses for the shop.

The plans I worked from (I'm to the point now in June of '08 that I'm mostly done with the plans, now comes the wiring and finish details) described building the trusses yourself vs. having them farmed out. I simply had to cut 8 2x4's to length and angle, then using a jig laid out on the floor of the shop, assemble the trusses, with gussets and construction adhesive.


Mark cut these pieces on the right to size using his Radial Arm saw, which really helped with the accuracy of the trusses.



















Here I am cutting the larger gussets to size. They were used to attatch the two halves together





I used my tablesaw crosscut sled to gang cut a notch in some of the upper truss pieces for the end trusses for the perlins to fit into. In the end, however that proved unnescesary because of the metal roof I wound up using. The blocking for the metal roof did a great job of tying the all of the trusses together.

After cutting all of the pieces, (and re-cutting some when we had to rebuild a couple of the trusses) a pattern was laid out on the floor of the shop, and the pieces were nailed and secured with construction adhesive.





Here is Mark using the semi-famous Polish Polearm to muscle the first two trusses up on the end of the shop. We did those two the hard way as it turns out, putting them up together including the perlins, which realllly made it a) heavy and b) unwieldy.



the rest of the trusses were installed individually. Grizz helped on that job, and without the two of them plus Lori and the boys my shop would still be in the dream stage.







Jumping forward a bit, here's how things looked once we had a few more trusses installed.










Afer that, it was 'time' to install sheathing for the roof. I made this neat jig to help get the sheathing up on the shop. In the end, we wound up removing the sheathing to put the blocking up on the roof, but here was how the sheathing went up.

The sheathing went up on those two boards screwed to the joists, there were plywood stops which would catch the sheet allowing me to climb the ladder without having to carry the 5/8 ply sheathing.

No comments: